Wifi Aruba IAP-315, chuẩn wave 2, 8 anten

– Wifi Aruba IAP-315, chuẩn AC2000 wave 2, 8 anten, 2 x LAN 1Gb.

– Quản lý tập trung, chịu tải cao 50 thiết bị.

AP-310 SERIES SPECIFICATIONS

•  AP-314 (controller-managed) and IAP-314 (Instant):

– 5GHz 802.11ac 4×4 MIMO (1,733 Mbps max rate) and 2.4 GHz 802.11n 2×2 MIMO (300 Mbps max rate) radios, with a total of four dual-band RP-SMA connectors for external antennas

•  AP-315 (controller-managed) and IAP-315 (Instant):

– 5GHz 802.11ac 4×4 MIMO (1,733 Mbps max rate)

and 2.4 GHz 802.11n 2×2 MIMO (300 Mbps max rate)

radios, with a total of four integrated omni-directional

downtilt dual-band antennas

DATA SHEET

ARUBA 310 SERIES WIRELESS ACCESS POINTS

3

WI-FI RADIO SPECIFICATIONS

•  AP type: Indoor, dual radio, 5 GHz 802.11ac 4×4 MIMO

and 2.4 GHz 802.11n 2×2 MIMO

•  Software-configurable dual radio supports 5 GHz (Radio 0)

and 2.4 GHz (Radio 1)

•  5 GHz: Four spatial stream Single User (SU) MIMO for up

to 1,733 Mbps wireless data rate to individual 4×4 VHT80

or 2×2 VHT160 client devices

•  2.4 GHz: Two spatial stream Single User (SU) MIMO for

up to 300 Mbps wireless data rate to individual 2×2 HT40

client devices

•  5 GHz: Four spatial stream Multi User (MU) MIMO for up

to 1,733 Mbps wireless data rate to up to three MU-MIMO

capable client devices simultaneously

•  Support for up to 256 associated client devices per radio,

and up to 16 BSSIDs per radio

•  Supported frequency bands (country-specific

restrictions apply):

– 2.400 to 2.4835 GHz

– 5.150 to 5.250 GHz

– 5.250 to 5.350 GHz

– 5.470 to 5.725 GHz

– 5.725 to 5.850 GHz

•  Available channels: Dependent on configured

regulatory domain.

•  Dynamic frequency selection (DFS) optimizes the use of

available RF spectrum.

•  Supported radio technologies:

– 802.11b: Direct-sequence spread-spectrum (DSSS)

– 802.11a/g/n/ac: Orthogonal frequency-division

multiplexing (OFDM)

•  Supported modulation types:

– 802.11b: BPSK, QPSK, CCK

– 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

•  Transmit power: Configurable in increments of 0.5 dBm
•  Maximum (conducted) transmit power (limited by local

regulatory requirements):

– 2.4 GHz band: +18 dBm per chain , +21dBm aggregate (2×2)

– 5 GHz band: +18 dBm per chain , +24dBm aggregate (4×4)

– Note: conducted transmit power levels exclude antenna

gain. For total (EIRP) transmit power, add antenna gain

•  Advanced Cellular Coexistence (ACC) minimizes

interference from cellular networks.

•  Maximum ratio combining (MRC) for improved

receiver performance.

•  Cyclic delay/shift diversity (CDD/CSD) for improved

downlink RF performance.

•  Short guard interval for 20-MHz, 40-MHz, 80-MHz and

160-MHz channels.

•  Space-time block coding (STBC) for increased range and

improved reception.

•  Low-density parity check (LDPC) for high-efficiency error

correction and increased throughput.

•  Transmit beam-forming (TxBF) for increased signal

reliability and range.

•  Supported data rates (Mbps):

– 802.11b: 1, 2, 5.5, 11

– 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

– 802.11n (2.4GHz): 6.5 to 300 (MCS0 to MCS15)

– 802.11n (5GHz): 6.5 to 600 (MCS0 to MCS31)

– 802.11ac: 6.5 to 1,733 (MCS0 to MCS9, NSS = 1 to 4 for

VHT20/40/80, NSS = 1 to 2 for VHT160)

•  802.11n high-throughput (HT) support: HT 20/40
•  802.11ac very high throughput (VHT) support:

VHT 20/40/80/160

•  802.11n/ac packet aggregation: A-MPDU, A-MSDU

WI-FI ANTENNAS

•  AP-314/IAP-314: Four RP-SMA connectors for external dual band antennas. Worst-case internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 0.6dB in 2.4 GHz and 1.2dB in 5 GHz.
•  AP-315/IAP-315: Four integrated dual-band downtilt omni-directional antennas for 4×4 MIMO with peak antenna gain of 3.6dBi in 2.4 GHz and 6.0dBi in 5 GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees.

– Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the effective per-antenna pattern is 3.1dBi in 2.4 GHz and 3.8dBi in 5 GHz.

OTHER INTERFACES

•  One 10/100/1000BASE-T Ethernet network interfaces (RJ-45)

– Auto-sensing link speed and MDI/MDX

– 802.3az Energy Efficient Ethernet (EEE)

•  USB 2.0 host interface (Type A connector)
•  Bluetooth Low Energy (BLE) radio

– Up to 4dBm transmit power (class 2) and -91dBm

receive sensitivity

– Integrated antenna with roughly 30 degrees downtilt

and peak gain of 3.4dBi (AP-314/IAP-314) or 1.5dBi

(AP-315/IAP-315)

•  Visual indicators (multi-color LEDs): For system and

radio status

DATA SHEET

ARUBA 310 SERIES WIRELESS ACCESS POINTS

4

•  Reset button: Factory reset (during device power up)
•  Serial console interface (proprietary; optional adapter

cable available)

•  Kensington security slot

POWER SOURCES AND CONSUMPTION

•  The AP supports direct DC power and Power over

Ethernet (POE)

•  When both power sources are available, DC power takes

priority over POE

•  Power sources are sold separately
•  Direct DC source: 12Vdc nominal, +/- 5%

– Interface accepts 2.1/5.5-mm center-positive circular

plug with 9.5-mm length

•  Power over Ethernet (PoE): 48 Vdc (nominal)

802.3af/802.3at compliant source

– Unrestricted functionality with 802.3at PoE

– When using IPM, the AP may enter power-save mode

with reduced functionality when powered by an 802.3af

PoE source (see details on Intelligent Power Monitoring

elsewhere in this datasheet)

– Without IPM, the USB port is disabled and transmit

power of the 2.4 GHz radio chains are reduced by 3dB

to 15dBm max when the AP is powered by an 802.3af

PoE source

•  Maximum (worst-case) power consumption: 14.4W

(802.3at PoE), 13.6W (802.3af PoE) or 12.7W (DC)

– Excludes power consumed by external USB device (and

internal overhead); this could add up to 6.4W (PoE) or

5.9W (DC) for a 5W/1A USB device

•  Maximum (worst-case) power consumption in idle mode:

6.4W (PoE) or 5.9W (DC)

MOUNTING

•  The AP ships with two (black) mounting clips to attach to a

9/16-inch or 15/16-inch flat T-bar drop-tile ceiling.

•  Several optional mount kits are available to attach the

AP to a variety of surfaces; see the Ordering Information

section for details.

MECHANICAL

•  Dimensions/weight (unit, excluding mount accessories):

– 182mm (W) x 180mm (D) x 48mm (H)

– 650g/23oz

•  Dimensions/weight (shipping):

– 223mm (W) x 218mm (D) x 55mm (H)

– 850g/30oz

ENVIRONMENTAL

•  Operating:

– Temperature: 0° C to +50° C (+32° F to +122° F)

– Humidity: 5% to 93% non-condensing

•  Storage and transportation:

– Temperature: -40° C to +70° C (-40° F to +158° F)

REGULATORY

•  FCC/ISED
•  CE Marked
•  RED Directive 2014/53/EU
•  EMC Directive 2014/30/EU
•  Low Voltage Directive 2014/35/EU
•  UL/IEC/EN 60950
•  EN 60601-1-1 and EN 60601-1-2
•  EN 50155 (AP-315/IAP-315)

For more country-specific regulatory information and approvals, please see your Aruba representative.

RELIABILITY

MTBF: 916,373 hrs (105yrs) at +25C operating temperature

REGULATORY MODEL NUMBERS